↑↓ to moveEnter to openEsc to close

Machinery — 7 series

Flexible duct machines & equipment

Flexible ducting machines engineered to combine with each other. Choose a single station or specify the complete line, from wire decoiling to the boxed duct.Every machine is engineered to combine with the others — choose one station or the complete line.

Compare at a glance

Which machine fits your duct programme?

Confirmed figures for throughput, footprint and power are issued with your quotation.

Flexible duct machines compared by materials, output and key figure
MachineMaterialsOutputKey figure
Laminated Duct MachineAluminium, PVC, polyesterFlexible duct & jacketsA1 · M1 · C1 · UL-181
PVC Duct MachineReinforced PVC, plain PVC, PUCorrosion-resistant ductFrom 100 micron
Semi-Flexible Duct MachineAluminium, stainless steelSemi-flexible ductAutomated
Insulation & Packing MachineGlass fibre, sleeve stockInsulated, boxed ductUp to 10 m
Duct Connector MachineCanvas, vinyl fabricDuct connectorsMetal strip ends
Stick-Up Pin MachineAluminiumSelf-adhesive pins36–60 / min
Wire Decoiler & UncoilerWire, cable, metal stripFed materialStrip to 1000 kg

FAQ

Questions about our ducting machines

Can’t find your answer? Ask the engineers who build the machines.

What are flexible ducting machines?

Flexible ducting machines form duct from aluminium foil, laminate, polyester or PVC around a spiral steel wire, then insulate, compress and pack it. Piton builds every station of that line: the wire decoiler, laminated, PVC and semi-flexible duct machines, the insulation and packing machine, and machines for duct connectors and insulation pins.

Are these the same as sheet-metal duct fabrication machines?

No. Sheet-metal duct fabrication machines (rectangular auto duct lines, spiral duct formers, lock formers) make rigid steel duct. Piton specialises in machines for flexible, insulated and semi-flexible duct, plus the connectors and insulation pins used to install it.

Which machines make a complete flexible duct production line?

A complete line runs in five steps: a wire decoiler feeds wire and strip, a laminated, PVC or semi-flexible duct machine forms the core duct, the insulation and packing machine adds glass fibre and an outer sleeve and boxes the duct, and dedicated machines produce duct connectors and insulation pins.

Can I start with one machine and add stations later?

Yes. Every Piton machine is designed to hand over to the next, so you can start with a single duct machine and add decoiling, insulation, packing or accessory stations as your volumes grow.

Where are Piton ducting machines built?

All machines are designed and built by Piton Engineering in Sint Annaparochie, Friesland, the Netherlands, since 1990. Piton engineers install them, train your operators on site and supply spare parts in more than 50 countries.

Not sure which configuration you need?

Send us the diameters and volumes you need — an engineer specifies the machine.